%20nkn-1.jpg)
Would you like to be a part of our community and receive all relevant updates?
We will only send you relevant information, and we promise not to spam you :)
|
|
||||
|
||||
|
Processor |
Dual-Core ARM Cortex-A9 MPCore |
Dual-Core ARM Cortex-A9 MPCore |
Dual-Core ARM Cortex-A9 MPCore |
Dual-Core ARM ARM Cortex-A9 MPCore |
|
FPGA |
Xilinx Zynq 7010 |
Xilinx Zynq 7010 |
Xilinx Zynq 7020 |
Xilinx Zynq 7020 |
|
RAM |
256MB (2Gb) |
512MB (4Gb) |
512MB (4Gb) |
1GB (8Gb) |
|
System memory |
Micro SD up to 32GB |
Micro SD up to 32GB |
Micro SD up to 32GB |
Micro SD up to 32GB |
|
||||
|
Ethernet |
1 Gbit |
1 Gbit |
1 Gbit |
1 Gbit |
|
USB |
USB 2.0 |
USB 2.0 |
USB 2.0 |
2x USB 2.0 |
|
WIFI |
using Wi-Fi dongle |
using Wi-Fi dongle |
using Wi-Fi dongle |
using Wi-Fi dongle |
|
||||
|
Channels |
2 |
2 |
2 |
2 |
|
Sample rate |
125MS/s |
125MS/s |
122.88MS/s |
250MS/s |
|
ADC resolution |
10 bit |
14 bit |
16 bit |
12 bit |
|
Full-scale voltage range |
± 1V / ± 20V |
± 1V / ± 20V |
± 0.25V / -2 dBm |
± 1V / ± 20V ** |
|
Input coupling |
DC |
DC |
AC |
AC/DC ** |
|
Bandwith |
DC-50MHz |
DC-60MHz |
300 kHz - 550 MHz |
DC - 60MHz |
|
Input impedance |
1M Ω |
1M Ω |
50 Ω |
1M Ω |
|
||||
|
Channels |
2 |
2 |
2 |
2 |
|
Sample rate |
125MS/s |
125MS/s |
122.88MS/s |
250MS/s |
|
ADC resolution |
10 bit |
14 bit |
16 bit |
12 bit |
|
Full-scale voltage range |
± 1V |
± 1V |
± 0.5V / +4 dBm |
± 1V / ± 5V (into 50 ohm load) ** ± 2V / ± 10V (Hi-Z load) ** |
|
Load impedance |
50 Ω |
50 Ω |
50 Ω |
50 Ω |
|
Shortcut protection |
Yes |
Yes |
N/A, RF transformer & AC-coupled |
Yes |
|
Typical raising/falling time |
2V / 10ns |
2V / 10ns |
N/A
|
10V / 17ns |
|
Bandwith |
DC - 60MHz |
DC - 60MHz |
300 kHz - 60MHz |
DC - 60MHz |
|
||||
|
Digital IOs |
16 |
16 |
16 |
16 |
|
Analog inputs |
4 channels 0-3.5V 12bit |
4 channels 0-3.5V 12bit |
4 channels 0-3.5V 12bit |
4 channels 0-3.5V 12bit |
|
Analog outputs |
4 channels 0-1.8V 12bit |
4 channels 0-1.8V 12bit |
4 channels 0-1.8V 12bit |
4 channels 0-1.8V 12bit |
|
Communication interfaces |
I2C, UART, SPI |
I2C, UART, SPI |
I2C, UART, SPI |
I2C, UART, SPI, USB |
|
Available voltages |
+5V, +3.3V, -4V |
+5V, +3.3V, -4V |
+5V, +3.3V, -4V |
+5V, +3.3V, -4V |
|
||||
|
Trigger input |
through extension connector |
through extension connector |
through extension connector |
through BNC connector |
|
Daisy chain connection |
N/A |
over SATA connection |
over SATA connection |
over eSATA connection |
|
Ref. clock input |
N/A |
N/A |
N/A |
through BNC connector |
**software selectable
%20nkn-1.jpg)
We will only send you relevant information, and we promise not to spam you :)
© 2021 StemLabs. All rights reserved